Menu
Your Cart

Veebilehte kasutades nõustute selle Privaatsuspoliitikaga. Kui te ei nõustu selle poliitikaga, palun, ärge kasutage seda veebilehte. OÜ „Kompozītmateriali“ jätab endale õiguse seda poliitikat igal ajal muuta. Kui jätkate OÜ „Kompozītmateriāli“ veebilehe kasutamist pärast muudatuste tegemist meie Privaatsuspoliitikas, kinnitab see teie nõustumist nende muudatustega.Privaatsuspoliitika

Infusiooni epoksüvaigu 1,5 kg

Infusiooni epoksüvaigu 1,5 kg

Infusion resin 7 is featuring encreased bounding strength and reactivity, outstanding 
flexibility while a very high strength and temeprature resistance. The resin contains modificatory agent that 
extremely improves penetration of the laminating mixture into the fabric

Hardener 7M is a low-viscosity cyclo-alifatic hardener containing post-curing additives that enables 
lamination also without consequent curing by heat. Gel-time (100g) at 23°C is 40 minutes.

We recommend to use the system at the temperature range between 18°C – 30°C and use the common 
processing procedures for the composite production. 
 
This system has been designed so that it will get cured efficiently also at room temperature of 18°C – 30°C, 
therefore it can be processed at room temperature and used without the consequent heat curing. The 
processing time depends on the used hardener. 
By curing at room temperature (approx. 25°C) for the period of 24 hours a heat resistance of 55°C – 65°C can 
be achieved. 
By heat curing a heat resistance of up to 110°C can be achieved

A 100g resin : B 50g hardener

* Price shown for 1.5kg resin system

Specification
EpoksiidvaikEpidian 6411
Viskoossus 25°C mPa.s1 000 - 1 400 mPas
Proportsioonid100g/20g
Geeli aeg, temp. 20°C30 min
Epoksü number, mol / 100 g5,65 - 5,95 mol/kg

Lisa arvamus

Märkus: HTML kood ei ole lubatud!
Halb Hea
Captcha
  • Stock: In Stock
  • Model: INFUSION EPOXY
  • Weight: 1.50kg
  • Dimensions: 20.00cm x 20.00cm x 30.00cm
  • SKU: INFUSION EPOXY
18.15€
21.78€
Maksudeta: 15.00€