Menu
Your Cart

Kun käytte sivustolla, hyväksytte tämän tietosuojakäytännön. Jos ette ole samaa mieltä tämän tietosuojakäytännön kanssa, älkää käykö sivuillamme. ОY «Kompozītmateriāli» pidättää itsellaan oikeuden muuttaa tätä käyntöä milloin tahansa. Jos jatkatte «Kompozītmateriāli» ОY:n sivuston käyttöä, kun tietosuojakäytäntömme muutti, tämä vahvistaa, että hyväksytte nämä muutokset. Tietosuojakäytäntö

Infuusioepoksihartsi 1.5kg

Infuusioepoksihartsi 1.5kg | COMPOSITE24
Infuusioepoksihartsi 1.5kg | COMPOSITE24
Infuusioepoksihartsi 1.5kg | COMPOSITE24
Infuusioepoksihartsi 1.5kg | COMPOSITE24
-5 % Out Of Stock
Infuusioepoksihartsi 1.5kg | COMPOSITE24
Infuusioepoksihartsi 1.5kg | COMPOSITE24
Infuusioepoksihartsi 1.5kg | COMPOSITE24
Infuusioepoksihartsi 1.5kg | COMPOSITE24
Infuusioepoksihartsi 1.5kg

Infusion resin is featuring encreased bounding strength and reactivity, outstanding 
flexibility while a very high strength and temeprature resistance. The resin contains modificatory agent that 
extremely improves penetration of the laminating mixture into the fabric

Hardener IDA is a low-viscosity cyclo-alifatic hardener containing post-curing additives that enables 
lamination also without consequent curing by heat. Gel-time (100g) at 23°C is 40 minutes.

We recommend to use the system at the temperature range between 18°C – 30°C and use the common 
processing procedures for the composite production. 
 
This system has been designed so that it will get cured efficiently also at room temperature of 18°C – 30°C, 
therefore it can be processed at room temperature and used without the consequent heat curing. The 
processing time depends on the used hardener. 
By curing at room temperature (approx. 25°C) for the period of 24 hours a heat resistance of 55°C – 65°C can 
be achieved. 
By heat curing a heat resistance of up to 110°C can be achieved

A 100g resin : B 50g hardener

Infuusioepoksihartsi 1.5kg

EPOKSIHARTSI - Infuusioepoksihartsi 1.5kg

Infuusioepoksihartsi 1.5kg - EPOKSIHARTSI | COMPOSITE24

Specification
EpoksihartsiEpidian 6411
Viskositeetti 25°C mPa.s1 000 - 1 400 mPas
mittasuhteet100g/20g
Gel aika, lämpötila. 20°C30 min
Epoksi numero, mol / 100 g5,65 - 5,95 mol/kg

Kirjoita arvostelu

HUOM: HTML-koodia ei käännetä!
Huono Hyvä
Captcha
  • Stock: Out Of Stock
  • Model: INFUSION EPOXY
  • Weight: 1.50kg
  • Dimensions: 20.00cm x 20.00cm x 30.00cm
  • SKU: INFUSION EPOXY
24.20€
25.41€
Veroton: 20.00€
5 tai enemmän 24.20€
10 tai enemmän 22.99€