Search
Search Criteria
Products meeting the search criteria
Model: CUDP200
Carbon unidirectional prepreg is preimpregnated with 35% thermoset epoxy resin. This technology in its fundament is grade higher than the standart lamination or infusion process as the thermoset resin is mechanicaly higher grade. The curing time is 8-10 hours @ 80-100C ovens under vacuum or autoclav..
36.30€
Ex Tax:30.00€
Model: FTW200
Listed price for 1m2Application: Woven fiberglass cloths are very common for marine & composite construction and repair. Light weight cloths tend to provide a smooth finish and are excellent for producing a waterproofing layer over wood or other surfaces when combined with the ..
3.39€
Ex Tax:2.80€
Model: CARBON-TWILL-200
Carbon fiber fabric twill 200g / m2. This fabric is used mainly with epoxy resin and vinyl ester resin, less often with polyester resin, due to the lower mechanics of these resins. Carbon fiber fabric twill 200g/m2 has an elegant and sporty fabric pattern, which is easy to put into molds. Carbon fib..
26.74€
Ex Tax:22.10€
Model: CAPL200
Carbon fiber is a textile consisting mainly of carbon. It is produced by spinning various carbon-based polymers into fibers, treating them to remove most of the other substances, and weaving the resulting material into a fabric. This is usually embedded in plastic - typically epoxy - to form carbon ..
24.47€
Ex Tax:20.22€
Model: DI-BLACK-200
Introducing our Diolen Twill 200g/m² black fabric, the best choice for your composite industry needs. This high-performance fabric has been carefully engineered to excel when used with polyester, vinylester and epoxy resins, providing a robust solution that ensures the success of your composite proj..
14.99€
Ex Tax:12.39€
Model: DI-BLUE-200
Introducing our Diolen Twill 200g/m² blue fabric, the best choice for your composite industry needs. This high-performance fabric has been carefully engineered to excel when used with polyester, vinylester and epoxy resins, providing a robust solution that ensures the success of your composite proje..
15.99€
Ex Tax:13.22€
Model: DI-GREEN-200
Introducing our Diolen Twill 200g/m² green fabric, the best choice for your composite industry needs. This high-performance fabric has been carefully engineered to excel when used with polyester, vinylester and epoxy resins, providing a robust solution that ensures the success of your composite proj..
15.99€
Ex Tax:13.22€
Model: CUD200
Structurally stong material for reinforcing large parts. Usually using this fiber inside the laminate reinforcing them with woven fabrics from the outside.Unidirectional carbon fiber 200g/m2, 50cm width.Price shown for 1m2..
15.13€
Ex Tax:12.50€
Model: QIAX
Quadraxial fiberglass consists of three non-woven layers at + and - 45 and 0/90 degree fiber angles. Polyester yarn and mat backing are used to knit the cloth. Using quadraxial fiberglass cloth means less resin is necessary, the ability to lay fiber in the direction you want, and con..
4.83€ 6.47€
Ex Tax:3.99€Showing 1 to 9 of 9 (1 Pages)