Search
Search Criteria
Products meeting the search criteria
Model: KIT1
The set includes:0.5 m2 carbon fabric0.5 m2 fiberglass twill fabric500g epoxy resin + 65g hardenerapplication brush, gloves, mixing sticks, 2x cupsInstruction:Cut the fabric according to the necessary repairs;Mix the hardener with the resin by slowly mixing it in the proportions 100 (resin): 13 (har..
42.35€
Ex Tax:35.00€
Model: CUDP200
Carbon unidirectional prepreg is preimpregnated with 35% thermoset epoxy resin. This technology in its fundament is grade higher than the standart lamination or infusion process as the thermoset resin is mechanicaly higher grade. The curing time is 8-10 hours @ 80-100C ovens under vacuum or autoclav..
36.30€
Ex Tax:30.00€
Model: WINTER-EPOXY
Winter epoxy resin for low temperature conditions. Cure from +5°C.This is multipurpose winter epoxy resin is a low viscosity epoxy resin what is generaly used as laminating resin for wet layup and vacuum technology.The resin is destined to be used for processing and curing at room and encreased temp..
19.99€ 22.99€
Ex Tax:16.52€
Model: 652 IDA 3kg
Multipurpose epoxy resin is a low viscosity epoxy resin what is generaly used as laminating resin for wet layup and vacuum technology.The resin is destined to be used for processing and curing at room and encreased temperature. It is suitable for<> production of composite parts in combination ..
44.89€
Ex Tax:37.10€
Model: CARBON-TWILL-200
Carbon fiber fabric twill 200g / m2. This fabric is used mainly with epoxy resin and vinyl ester resin, less often with polyester resin, due to the lower mechanics of these resins. Carbon fiber fabric twill 200g/m2 has an elegant and sporty fabric pattern, which is easy to put into molds. Carbon fib..
26.74€
Ex Tax:22.10€
Model: carbon-spread-193
High quality carbon plain 193g/m2,K12. Highly compact with no transparency.Easy to layup over or in hard surfaces.Compatible in vacuum molding and open mold aplications...
29.65€
Ex Tax:24.50€
Model: CAPL200
Carbon fiber is a textile consisting mainly of carbon. It is produced by spinning various carbon-based polymers into fibers, treating them to remove most of the other substances, and weaving the resulting material into a fabric. This is usually embedded in plastic - typically epoxy - to form carbon ..
24.47€
Ex Tax:20.22€
Model: CTWIL163
Carbon fiber fabric, or the so-called "carbonate" is a material made of carbon fiber and is used in composite structures such as ships, yachts, airplanes, automotive / moto parts, sports equipment, etc. Carbon fiber is distinguished by high strength, durability, low weight, high chemical resistance,..
23.60€
Ex Tax:19.50€
Model: CTWIL285
High quality carbon twill 285g/m2,K3. Highly compact with no transparency.Easy to layup over or in hard surfaces.Compatible in vacuum molding and open mold aplications...
36.30€
Ex Tax:30.00€
Model: FORGED-CARBON
Cut carbon fiber into pieces. This material is created to give uniqueness to the product you create.This carbon fiber is incorporated into the molds as a first coat by wet application, infusion or prepreg thermoforming techniques.This material is developed by a simple filling method, followed by a c..
55.66€
Ex Tax:46.00€
Model: CTWIL400
High quality carbon twill 400g/m2,K3. Highly compact with no transparency.Easy to layup over or in hard surfaces.Compatible in vacuum molding and open mold aplications...
35.70€
Ex Tax:29.50€
Model: CUD200
Structurally stong material for reinforcing large parts. Usually using this fiber inside the laminate reinforcing them with woven fabrics from the outside.Unidirectional carbon fiber 200g/m2, 50cm width.Price shown for 1m2..
15.13€
Ex Tax:12.50€
Model: CUD300
Structurally stong material for reinforcing large parts. Usually using this fiber inside the laminate reinforcing them with woven fabrics from the outside.Unidirectional carbon fiber 200g/m2, 50cm width.Price shown for 1m2..
19.36€
Ex Tax:16.00€
Model: BIAC 450 90
Biaxial carbon cloth consists of two non-woven layers at 90 degree fiber angles. Polyester yarn and mat backing are used to knit the cloth. Using biaxal carbon cloth means less resin is necessary, the ability to lay fiber in the direction you want, and conforms easily. This is carbon cloth with 90 d..
27.16€
Ex Tax:22.45€
Model: BIAC600
Biaxial carbon cloth consists of two non-woven layers at 45 degree fiber angles. Polyester yarn and mat backing are used to knit the cloth. Using biaxal carbon cloth means less resin is necessary, the ability to lay fiber in the direction you want, and conforms easily. This is carbon cloth with 45 d..
22.99€ 29.28€
Ex Tax:19.00€
Model: q-c-841
Quadriaxial carbon fabric 841 g/m2 with fiber orientation 0/90/+45/-45 gives you optimum multiaxial strength to the material. Uaually used for strengthen structural parts as the innes layer or full laminates. Can be used with epoxy resins and vinylester resins. Features flat, crimped fibers, and als..
26.62€ 29.28€
Ex Tax:22.00€
Model: DB304
Biaxial carbon cloth consists of two layers at 45 degree fiber angles. Polyester yarn and mat backing are used to knit the cloth. Using biaxal carbon cloth means less resin is necessary, the ability to lay fiber in the direction you want, and conforms easily. This is carbon cloth with 45 degree..
15.73€ 16.94€
Ex Tax:13.00€
Model: BIAC400
Biaxial carbon cloth consists of two layers at 45 degree fiber angles. Polyester yarn and mat backing are used to knit the cloth. Using biaxal carbon cloth means less resin is necessary, the ability to lay fiber in the direction you want, and conforms easily. This is carbon cloth with 45 degree..
22.99€ 24.20€
Ex Tax:19.00€
Model: HYB165
The hybrid cloth twill is charactereized by its high impact resistance and mechanical properties which is provided by kevlars high tensile strenght, and as an added bonus the cloth is fortified by carbons high stiffness. This cloth is better used with epoxy or vinylester resins. Wi..
22.99€ 23.60€
Ex Tax:19.00€
Model: HYBRAID
Hybrid Carbon / Kevlar Braided Sleeve 32mm width.Compatible with Epoxy, Vinylester and other resin systems.Price shown for 1lm (linear meter)..
11.50€
Ex Tax:9.50€
Model: HYBRAID
Carbon braided sleeve width 20 mm. It can be used to crate cylindrical forms, forms with edges. These sleves are used in the production of hockey sticks, bycicle rims and other tubular products.Meant to be used with epoxy or vinylester resins.Price shown for 1 m...
7.26€
Ex Tax:6.00€
Model: HYBRAID40
Carbon braided sleeve width 70 mm. It can be used to crate cylindrical forms, forms with edges. These sleves are used in the production of hockey sticks, bycicle rims and other tubular products.Meant to be used with epoxy or vinylester resins.Price shown for 1 m...
11.50€
Ex Tax:9.50€
Model: HYBRAID
Carbon braided sleeve width 70 mm. It can be used to crate cylindrical forms, forms with edges. These sleves are used in the production of hockey sticks, bycicle rims and other tubular products.Meant to be used with epoxy or vinylester resins.Price shown for 1 m...
14.52€
Ex Tax:12.00€
Model: CTAPE50
High quality carbon tape 50g/mHighly compact with no transparency.Easy to layup over or in hard surfaces.Compatible in vacuum molding and open mold aplications...
2.06€
Ex Tax:1.70€
Model: TAPE144
The glass fiber ribbon is used in composite structures such as ships, yachts, airplanes, auto / moto parts, sports equipment, etc. in production. Glass fiber ribbon with high durability, rigidity, high chemical resistance.Width: 50 mmThe price is 1mWeight: 144g / m2..
0.61€
Ex Tax:0.50€Showing 1 to 25 of 25 (1 Pages)