Search

-15 %

Model: TC42

TC42

Tensorgrip® TC42 is designed for the infusion mould market. This product is a high performance, solvent-based polymer adhesive in a pressurised canister delivery system. Tensorgrip® TC42 is specifically designed to hold reinforcing fibres in place during the infusion process of the resin witho..

8.23€ 9.68€

Ex Tax:6.80€

Model: Insiets

Infusion bleeder

The infusion net is a material to help transport the resin in infusion processes throughout the laminate. It creates smooth air flow to achieve a homogenous vacuum enviroment and a high quality composite part.Price shown for 1m2 infusion bleederNorādītā cena par 1m2 infūzijas sietaWidth : 1400&..

2.60€

Ex Tax:2.15€

New

Model: Infusion-Plug

Infusion plug

The infusion connector plug is for the infusion process. The infusion connector is placed under the vacuum film where an infusion transfer tube with a vacuum sealing tape is attached at the top. The infusion connector can be used repeatedly.This connector can also be used for wet application and sim..

6.05€

Ex Tax:5.00€

Model: INFSP

Infusion spiral (10m)

Infusion spiral is a spiral tube which allows easy flow or resin from the resin feed tube into product. Infusion spiral is typically positioned underneath the feed line directing resin flow into the further corners of the part...

6.05€

Ex Tax:5.00€

Model: MTI-H

MTI infusion hose

MTI infusion hose.The MTI hose consists of an evacuation hose, non-woven and air permeable membran. The sandwich construction leads top optimize the evacuation process and quality. Thus the MTI hose will minimize costs using vacuum infusion proces.Advantage:No resin trap necessary V..

4.78€

Ex Tax:3.95€

New

Model: Spiral-Plug

Spiral plug

The infusion spiral connector is used for the infusion process. The infusion spiral connector is placed under the vacuum film where a vacuum transfer tube with vacuum sealing tape is attached at the top. Place the infusion tube at the bottom of the infusion connector through which air or material is..

6.66€

Ex Tax:5.50€

Infusion Vinylester resin 4 kg

In Stock

Model: POLIMAL VE - 3MM

POLIMAL VE-3MM is used for structurally durable part production. Vinylester resin is know for its high chemical resistance and they can be used to produce glassfibre, carbon laminates and polymerconcrete etc.POLIMAL VE-3MM is best suited for use if high chemical resistance is needed. Parts creat..

50.82€

Ex Tax:42.00€

POLIMAL 1058 RTM Infusion

Model: POLIMAL 1058

Polyester resin POLIMAL 1058Package contains 220 kg polyester resin without hardenerPolyester resin POLIMAL 1058 is a DCPD (dicyclopentadiene) unsaturated base resin with a very low styrene emission and small shrinkage. This resin does not have the strong odour associated with other pol..

1,143.45€

Ex Tax:945.00€