Search
Search Criteria
Products meeting the search criteria
Model: TC42
Tensorgrip® TC42 is designed for the infusion mould market. This product is a high performance, solvent-based polymer adhesive in a pressurised canister delivery system. Tensorgrip® TC42 is specifically designed to hold reinforcing fibres in place during the infusion process of the resin witho..
8.23€ 9.68€
Ex Tax:6.80€
Brand: 3D CORE
Model: 3D-CORE-10mm
3D CORE is the cost effective solution for closed mould and hand lamination processes.The 3D CORE material is well known sandwich material for its flexibility and durability with remarkable joint setting possibility. Is used as core material in infusion process and does not require peelply, mesh..
14.62€
Ex Tax:12.08€
Model: COMPOFIX FAST
Rapid curing infusion spray COMPOFIX FAST.This spray adhesive is used to reinforce aramid, glass, carbon fabrics and peelply or other materials next to each other in the form as well as to strengthen so that the fabric texture does not move during lay-up application. Mostly this adhesive i..
10.65€ 13.31€
Ex Tax:8.80€
Model: Insiets
The infusion net is a material to help transport the resin in infusion processes throughout the laminate. It creates smooth air flow to achieve a homogenous vacuum enviroment and a high quality composite part.Price shown for 1m2 infusion bleederNorādītā cena par 1m2 infūzijas sietaWidth : 1400&..
2.60€
Ex Tax:2.15€
Model: Infusion-Plug
The infusion connector plug is for the infusion process. The infusion connector is placed under the vacuum film where an infusion transfer tube with a vacuum sealing tape is attached at the top. The infusion connector can be used repeatedly.This connector can also be used for wet application and sim..
6.05€
Ex Tax:5.00€
Model: INFSP
Infusion spiral is a spiral tube which allows easy flow or resin from the resin feed tube into product. Infusion spiral is typically positioned underneath the feed line directing resin flow into the further corners of the part...
6.05€
Ex Tax:5.00€
Model: SORIC-SF-2mm
Lantor Soric® SF n The cost effective solution for closed mould processes n Is used as core material and infusion medium n Is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy n Is suitable for closed mould proce..
9.68€ 10.89€
Ex Tax:8.00€
Model: SORIC-SF-3MM
Lantor Soric® SF n The cost effective solution for closed mould processes n Is used as core material and infusion medium n Is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy n Is suitable for closed mould proce..
13.92€ 15.73€
Ex Tax:11.50€
Model: MTI-H
MTI infusion hose.The MTI hose consists of an evacuation hose, non-woven and air permeable membran. The sandwich construction leads top optimize the evacuation process and quality. Thus the MTI hose will minimize costs using vacuum infusion proces.Advantage:No resin trap necessary
V..
4.78€
Ex Tax:3.95€
Model: MTI Valve
MTI valveThe valve is placed between the resin flow hoses. It regulates the flow of the resin, giving optimum fibre volume ration. The fibres are evenly covered with resin. No resin pooling at the inlet point. No supersaturation with resin. The price shown is for 1 unit...
18.15€
Ex Tax:15.00€
Model: peelply
Peel Ply fabrics may be used to build large composite structures or to facilitate small repairs where a clean, textured surface is desired for additional bonding and finishing operations. A Peel Ply layer also provides pressure to the GRP composite structure during fabrication and cure allowing gas ..
2.42€
Ex Tax:2.00€
Model: PRF1
Perforated film has a good chemical and thermal resistance for a low cost. Mostly used in wet-layup vacuum bagging process in combination with breather and vacuum bag...
1.74€
Ex Tax:1.44€
Model: POLYP
Smooth polypropylene sheet is ideal for barriers in composite molds and resin casting. The 5 mm plastic sheet is hard enough to create straight and precise barriers, but thin enough to be able to bend slightly, such as in a curved shape. Polypropylene sheet separates easily, which means that the res..
24.20€
Ex Tax:20.00€
Model: Spiral-Plug
The infusion spiral connector is used for the infusion process. The infusion spiral connector is placed under the vacuum film where a vacuum transfer tube with vacuum sealing tape is attached at the top. Place the infusion tube at the bottom of the infusion connector through which air or material is..
6.66€
Ex Tax:5.50€
Model: SILICON
Two component tooling silicone. Hardens using 5% of catalyst. Silicons is elastic and is suitable for complex shape product production. The material is longlasting and it has long life time.Processing: This tooling silicone is suitable for casting epoxy resins, casting polyester resins and other..
29.04€
Ex Tax:24.00€
Model: TC-SQZE
Tube clip SqueezeeSqueezee allows exact dosing of the resin flow and easy disconnecting of the resin line in the vacuum infusionIdeal for disconnecting all tube line
Requires only minimum of force for disconnecting resin lines
Exact dosing of the resin flow is possible
Designed for ..
43.32€
Ex Tax:35.80€
Model: VACUUM TAPE
High-performance vacuum film is specially made for maximum air hold during the curing time.Width 1,2mThickness 50MicronsResist up to 120 C° *Price shown for 1m2
(function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){ (i[r].q=i[r].q||[]).push(arguments)},i..
2.12€
Ex Tax:1.75€
Model: VAC-B-120
Fast and easy usable vacuum tube for long parts and small parts. Saves vacuum sealant tape and it can be used with polyester, vinylester and epoxy resins.Width 120cmThickness 75µTemperature up to 180CChemical resistance*Price shown for 1 linear meter..
3.51€
Ex Tax:2.90€
Model: VINGEL
Urethane modified Vinylester brush gelcoat, which has excellent gloss retention and exceptional resilience. It has good chemical resistance and offers a genuine solution to the problem of 'water marking'.Apply with brushPrice shown with MEKP 2% hardener(function(i,s,o,g,r,a,m){i['Googl..
11.98€
Ex Tax:9.90€
Model: WAX-High TEMP
Very hard wax from the highest quality carnauba oil mixed with substances from organic processes. Provides an easily durable to glossy finish, provides a durable and wear-resistant release interface. Minimal wax accumulation occurs when molds are cyclized at elevated temperatures or for extended per..
27.23€
Ex Tax:22.50€
Model: M-700
Mold wax for room temperature molding(function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
(i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),
m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
})(window,do..
19.97€
Ex Tax:16.50€
Model: vtape
(function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
(i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),
m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
})(window,document,'script','//www.google-analytics.com..
9.68€
Ex Tax:8.00€
Model: PVA
PVA (Poly Vinyl Alcohol) mould release agent can be wiped, sponged or sprayed on to a wide range of pattern and mould surfaces to provide a very compatible and reliable release barrier for polyester, vinyl ester and epoxy composites.PVA is often the first-choice release agent whenever there is i..
20.57€
Ex Tax:17.00€
Model: PVA
PVA (Poly Vinyl Alcohol) mould release agent can be wiped, sponged or sprayed on to a wide range of pattern and mould surfaces to provide a very compatible and reliable release barrier for polyester, vinyl ester and epoxy composites.PVA is often the first-choice release agent whenever there is i..
5.45€
Ex Tax:4.50€
Model: Bag Connector
These high quality Through Bag Connectors are a quick and reliable way to connect vacuum hoses to vacuum bags.The connector is made up of two halves, one of which is placed inside the vacuum bag, the other is placed on the outside. A small hole is made in the vacuum bag and the mandrel of the connec..
26.62€
Ex Tax:22.00€Showing 1 to 25 of 25 (1 Pages)