Menu
Your Cart

Naudodamiesi šiuo tinklalapiu jūs sutinkate su Privatumo politika. Jeigu nesutinkate su šia politika, prašome nesinaudoti tinklalapiu. SIA „Kompozītmateriāli“ išsaugo teisę keisti šią politiką bet kuriuo metu. Jeigu toliau naudositės SIA „Kompozītmateriāli“ tinklalapiu po pakeistos mūsų Privatumo politikos, jūs sutinkate su jos pakeitimais. Privatumo politika

Infuzijos epoksidinė derva 1,5 kg

Infuzijos epoksidinė derva 1,5 kg

Infusion resin 7 is featuring encreased bounding strength and reactivity, outstanding 
flexibility while a very high strength and temeprature resistance. The resin contains modificatory agent that 
extremely improves penetration of the laminating mixture into the fabric

Hardener 7M is a low-viscosity cyclo-alifatic hardener containing post-curing additives that enables 
lamination also without consequent curing by heat. Gel-time (100g) at 23°C is 40 minutes.

We recommend to use the system at the temperature range between 18°C – 30°C and use the common 
processing procedures for the composite production. 
 
This system has been designed so that it will get cured efficiently also at room temperature of 18°C – 30°C, 
therefore it can be processed at room temperature and used without the consequent heat curing. The 
processing time depends on the used hardener. 
By curing at room temperature (approx. 25°C) for the period of 24 hours a heat resistance of 55°C – 65°C can 
be achieved. 
By heat curing a heat resistance of up to 110°C can be achieved

A 100g resin : B 50g hardener

* Price shown for 1.5kg resin system

Specification
Epoksidinė dervaEpidian 6411
Klampumas 25°C mPa.s1 000 - 1 400 mPas
Proporcijos100g/20g
Gelio laikas, temp. 20°C30 min
Epoksidinis numeris, mol / 100 g5,65 - 5,95 mol/kg

Parašyti įvertinimą

Pastaba: Įvestas tekstas nebus išverstas.
Blogas Geras
Captcha
  • Stock: In Stock
  • Model: INFUSION EPOXY
  • Weight: 1.50kg
  • Dimensions: 20.00cm x 20.00cm x 30.00cm
  • SKU: INFUSION EPOXY
18.15€
21.78€
Be PVM: 15.00€