Search
Search Criteria
Products meeting the search criteria
-7 %
Model: GELB20
Upgrade your project with our premium Black Polyester Gelcoat. This versatile gelcoat offers a sleek, glossy finish that not only enhances the appearance of your surfaces but also provides excellent protection against the elements. Perfect for a wide range of applications, from boat hulls to automot..
157.30€ 169.40€
Ex Tax:130.00€
Model: TOPB20
Hand lay-up black topcoat. Topcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance.Topcoat needs to be applied in 2 layers. It is best for the layer..
199.65€
Ex Tax:165.00€
Model: CUDP200
Carbon unidirectional prepreg is preimpregnated with 35% thermoset epoxy resin. This technology in its fundament is grade higher than the standart lamination or infusion process as the thermoset resin is mechanicaly higher grade. The curing time is 8-10 hours @ 80-100C ovens under vacuum or autoclav..
36.30€
Ex Tax:30.00€
Model: GEL-C20
It has shiny finish with very deep transparrency. UV, anti crack and humidity resistance gives this gelcoat good durability long-term.Hand lay-up transparent gelcoat. Gelcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite mate..
169.40€
Ex Tax:140.00€
Model: TOP-C20
It has shiny finish with very deep transparrency. UV, anti crack and humidity resistance gives this topcoat good durability long-term.Hand lay-up transparent topcoat. topcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced com..
175.45€
Ex Tax:145.00€
Model: VAC-B-120
Fast and easy usable vacuum tube for long parts and small parts. Saves vacuum sealant tape and it can be used with polyester, vinylester and epoxy resins.Width 120cmThickness 75µTemperature up to 180CChemical resistance*Price shown for 1 linear meter..
3.51€
Ex Tax:2.90€
-7 %
Model: GELW20
Hand lay-up white gelcoat intended to use with polyester and vinilester resins. Gelcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance.Gelcoat need..
157.30€ 169.40€
Ex Tax:130.00€
Model: TOPW20
Hand lay-up white topcoat intended to use with polyester and vinilester resins. Topcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance.&n..
199.65€
Ex Tax:165.00€
Model: MUCU-I
Practical barrell carrier that lifts, rotates and tilts fully loaded 210 litre steel drums making transportation and handling easy. The drum can be locked in a horizontal position for draining or a vertical position to avoid spills. When unlocked, the drum may be turned end-over-end to agitate conte..
121.00€
Ex Tax:100.00€
Model: FTW200
Listed price for 1m2Application: Woven fiberglass cloths are very common for marine & composite construction and repair. Light weight cloths tend to provide a smooth finish and are excellent for producing a waterproofing layer over wood or other surfaces when combined with the ..
3.39€
Ex Tax:2.80€
Model: PVA
PVA (Poly Vinyl Alcohol) mould release agent can be wiped, sponged or sprayed on to a wide range of pattern and mould surfaces to provide a very compatible and reliable release barrier for polyester, vinyl ester and epoxy composites.PVA is often the first-choice release agent whenever there is i..
5.45€
Ex Tax:4.50€
New
Model: CARBON-TWILL-200
Carbon fiber fabric twill 200g / m2. This fabric is used mainly with epoxy resin and vinyl ester resin, less often with polyester resin, due to the lower mechanics of these resins. Carbon fiber fabric twill 200g/m2 has an elegant and sporty fabric pattern, which is easy to put into molds. Carbon fib..
26.74€
Ex Tax:22.10€
New
Model: CARBON-TWILL-SPREAD-200
Carbon fiber fabric twill 200g / m2. This fabric is used mainly with epoxy resin and vinyl ester resin, less often with polyester resin, due to the lower mechanics of these resins. Carbon fiber fabric twill 200g/m2 has an elegant and sporty fabric pattern, which is easy to put into molds. Carbon fib..
35.09€
Ex Tax:29.00€
Model: CAPL200
Carbon fiber is a textile consisting mainly of carbon. It is produced by spinning various carbon-based polymers into fibers, treating them to remove most of the other substances, and weaving the resulting material into a fabric. This is usually embedded in plastic - typically epoxy - to form carbon ..
24.47€
Ex Tax:20.22€
Model: DI-BLACK-200
Introducing our Diolen Twill 200g/m² black fabric, the best choice for your composite industry needs. This high-performance fabric has been carefully engineered to excel when used with polyester, vinylester and epoxy resins, providing a robust solution that ensures the success of your composite proj..
14.99€
Ex Tax:12.39€
Model: DI-BLUE-200
Introducing our Diolen Twill 200g/m² blue fabric, the best choice for your composite industry needs. This high-performance fabric has been carefully engineered to excel when used with polyester, vinylester and epoxy resins, providing a robust solution that ensures the success of your composite proje..
15.99€
Ex Tax:13.22€
Model: DI-GREEN-200
Introducing our Diolen Twill 200g/m² green fabric, the best choice for your composite industry needs. This high-performance fabric has been carefully engineered to excel when used with polyester, vinylester and epoxy resins, providing a robust solution that ensures the success of your composite proj..
15.99€
Ex Tax:13.22€
Model: CUD200
Structurally stong material for reinforcing large parts. Usually using this fiber inside the laminate reinforcing them with woven fabrics from the outside.Unidirectional carbon fiber 200g/m2, 50cm width.Price shown for 1m2..
15.13€
Ex Tax:12.50€
Model: IDA
IDA- amine hardener (aliphatic amine)IDA hardener is mainly used in compositions with low molecular weight epoxy resins and products based on them.Properties:Viscosity at 25 ° C: 20 - 30 (mPa s)Density at 20 ° C: 0.978 - 0.983 (g / cm 3)Amine number: min. 1100 (mg KOH / g)..
9.14€
Ex Tax:7.55€
-25 %
Model: QIAX
Quadraxial fiberglass consists of three non-woven layers at + and - 45 and 0/90 degree fiber angles. Polyester yarn and mat backing are used to knit the cloth. Using quadraxial fiberglass cloth means less resin is necessary, the ability to lay fiber in the direction you want, and con..
4.83€ 6.47€
Ex Tax:3.99€
Model: POLIMAL 143 AWTP
Polyester resin Polimal 143AWTP is based on terepthalic acid it is unsaturated resin with low styrene emission, designed for wet layup and spraying method. This polyester resins low exothermal properties and fast curing makes it a fast and cost-effective resin for producing composite ..
961.95€
Ex Tax:795.00€
Model: POLIMAL1094AWTP-2
Terethephtalic pre-accelerated, low styrene emission and thixotropic unsaturated polyester resin. It contains a colour change system and will change from blue to natural brown colour when the catalyst is added to the resin.Polyester resin designed mainly for spray application but is al..
968.00€
Ex Tax:800.00€
Pre-Order
Model: POLIMAL VE - 2MM
POLIMAL VE-2MM is used for structurally durable part production. Vinylester resin is know for its high chemical resistance and they can be used to produce glassfibre, carbon laminates and polymerconcrete etc.POLIMAL VE-2MM is best suited for use if high chemical resistance is needed. Parts creat..
1,397.55€
Ex Tax:1,155.00€
--11 %
Model: TOOL+P
Tooling resin is a pre-accelerated low profile, thixotropic resin specifically designed for rapid tool making. It has improved shrinkage control giving good handling and rapid cure. Zero shrink and temperature resistance up to 80C.This pre-accelerated polyester resin is catalysed using MEKP cat..
242.00€ 217.80€
Ex Tax:200.00€
Model: HYBRAID
Carbon braided sleeve width 20 mm. It can be used to crate cylindrical forms, forms with edges. These sleves are used in the production of hockey sticks, bycicle rims and other tubular products.Meant to be used with epoxy or vinylester resins.Price shown for 1 m...
7.26€
Ex Tax:6.00€Showing 1 to 25 of 25 (1 Pages)