EPOXY RESIN

New -24 %

Model: Ampreg 30

Ampreg 30

Ampreg 30 has been optimised for the manufacture of large composite structures using hand layup & vacuum bagging techniques whilst offering improved health & safety through the careful selection of low toxicity raw materials. The relatively low initial mixed viscosity of Ampreg 30 allows fas..

36.57€ 47.82€

Ex Tax:30.22€

Casting Epoxy Resin 1.3kg

New -17 %

Model: CASTEPOX

A high-gloss transparent casting system that can be used on almost any surface. Resin can be used for production of decorative objects, as a glue and also as a connector with fiberglass. Resin tends to protect against ultraviolet radiation, moisture, and has ability to self-level. You can put ..

23.79€ 28.74€

Ex Tax:19.66€

Epoxy coating Resin 1.4kg

-12 %

Model: CEPOX

A high-gloss transparent coating system that can be used on almost any surface. Resin can be used for production of decorative objects, as a glue and also as a connector with fiberglass. Resin tends to protect against ultraviolet radiation, moisture, and has ability to self-level. You can put ..

26.62€ 30.24€

Ex Tax:22.00€

New -8 %

Model: PRIME 37

PRIME 37

PRIME 37 is a low toxicity epoxy resin for infusion. Suitable for the production of large, complex composite parts. For use with carbon fiber, armid or fiberglass fabric. It is typically used in yacht masts, yacht hulls, wind turbine blades, aircraft wings and other types of load-bearing structures...

133.10€ 145.44€

Ex Tax:110.00€

New -16 %

Model: WINTER-EPOXY

Winter epoxy resin

Winter epoxy resin for low temperature conditions. Cure from +5°C.This is multipurpose winter epoxy resin is a low viscosity epoxy resin what is generaly used as laminating resin for wet layup and vacuum technology.The resin is destined to be used for processing and curing at room and encreased temp..

19.36€ 22.99€

Ex Tax:16.00€

-6 %

Model: 601-Z1-1.13

Epoxy resin 1.13 kg

Multipurpose epoxy resin is a high viscosity epoxy resin what is generaly used as laminating resin for wet layup and vacuum technology.The resin is destined to be used for processing and curing at room and encreased temperature. It is suitable for<> production of composite parts in combin..

18.76€ 20.03€

Ex Tax:15.50€

Epoxy resin with hardener 565g

Model: EPOXY565

Resin formulations for the development of glass fibers, carbon fibers, kevlar and other laminates, for the development of aggregates, for concrete impregnation, for the development of filler-type epoxy floors, wood, stone, iron, etc. gluing materials.These epoxy resins are formulated in a hand-appli..

13.30€

Ex Tax:10.99€

Epoxy resin with Hardener 3.4 kg

Model: 601-Z1-3.4

Multipurpose epoxy resin is a low viscosity epoxy resin what is generaly used as laminating resin for wet layup and vacuum technology.The resin is destined to be used for processing and curing at room and encreased temperature. It is suitable for<> production of composite parts in combination ..

55.01€

Ex Tax:45.46€

Epoxy resin with Hardener 5,4 kg

-5 %

Model: 601-Z1-5.4

71.39€ 75.26€

Ex Tax:59.00€

Infusion epoxy resin 1.5kg

-5 % Out Of Stock

Model: INFUSION EPOXY

Infusion EPOXY is featuring encreased bounding strength and reactivity, outstanding flexibility while a very high strength and temeprature resistance. The resin contains modificatory agent that extremely improves penetration of the laminating mixture into the fabricHardener ID..

24.20€ 25.41€

Ex Tax:20.00€

Model: Z1

Z1 Hardener 200g

Z-1 - amine hardener (aliphatic amine)Z-1 hardener is mainly used in compositions with low molecular weight epoxy resins and products based on them.Properties:Viscosity at 25 ° C: 20 - 30 (mPa s)Density at 20 ° C: 0.978 - 0.983 (g / cm 3)Amine number: min. 1100 (mg KOH / g)..

4.74€

Ex Tax:3.92€

Epoxy resin with Hardener 60kg

Model: 601-ET-60

Multipurpose epoxy resin EPIDIAN 601 is a high viscosity epoxy resin what is generaly used as laminating resin for wet layup and vacuum technology.The resin is destined to be used for processing and curing at room and encreased temperature. It is suitable for production of composite parts ..

869.99€

Ex Tax:719.00€