Special Offers
-15 %
Model: TC42
Tensorgrip® TC42 is designed for the infusion mould market. This product is a high performance, solvent-based polymer adhesive in a pressurised canister delivery system. Tensorgrip® TC42 is specifically designed to hold reinforcing fibres in place during the infusion process of the resin witho..
8.23€ 9.68€
Ex Tax:6.80€
New
-24 %
Model: Ampreg 30
Ampreg 30 has been optimised for the manufacture of large composite structures using hand layup & vacuum bagging techniques whilst offering improved health & safety through the careful selection of low toxicity raw materials. The relatively low initial mixed viscosity of Ampreg 30 allows fas..
36.57€ 47.82€
Ex Tax:30.22€
-8 %
Model: GELB20
Hand lay-up black gelcoat intended to use with polyester and vinilester resins. Gelcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance.Gelcoat need..
133.10€ 145.20€
Ex Tax:110.00€
New
-17 %
Model: CASTEPOX
A high-gloss transparent casting system that can be used on almost any surface. Resin can be used for production of decorative objects, as a glue and also as a connector with fiberglass. Resin tends to protect against ultraviolet radiation, moisture, and has ability to self-level. You can put ..
23.79€ 28.74€
Ex Tax:19.66€
New
-20 %
Model: COMPOFIX FAST
Rapid curing infusion spray COMPOFIX FAST.This spray adhesive is used to reinforce aramid, glass, carbon fabrics and peelply or other materials next to each other in the form as well as to strengthen so that the fabric texture does not move during lay-up application. Mostly this adhesive i..
10.65€ 13.31€
Ex Tax:8.80€
-7 %
Model: EC Cutter
Cuts aramid, carbon, fiberglass and many other industrial fabrics. Fabric patterns with no wrist, hand and finger strain. It has a new, handy ergonomic designt, that is 100% portable. Works with rechargable battery or direct with 220 AC adapter. The kit includes, 2 pairs of extremely tough ..
211.75€ 228.69€
Ex Tax:175.00€
-12 %
Model: CEPOX
A high-gloss transparent coating system that can be used on almost any surface. Resin can be used for production of decorative objects, as a glue and also as a connector with fiberglass. Resin tends to protect against ultraviolet radiation, moisture, and has ability to self-level. You can put ..
26.62€ 30.24€
Ex Tax:22.00€
New
-7 %
Model: TOPG
Hand lay-up gray topcoat intended to use with polyester and vinilester resins. Topcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance. It..
7.99€ 8.59€
Ex Tax:6.60€
New
-8 %
Model: PRIME 37
PRIME 37 is a low toxicity epoxy resin for infusion. Suitable for the production of large, complex composite parts. For use with carbon fiber, armid or fiberglass fabric. It is typically used in yacht masts, yacht hulls, wind turbine blades, aircraft wings and other types of load-bearing structures...
133.10€ 145.44€
Ex Tax:110.00€
-21 %
Model: GELW
Hand lay-up white gelcoat intended to use with polyester and vinilester resins. Gelcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance.Gelcoat needs to ..
6.68€ 8.47€
Ex Tax:5.52€
-36 %
Model: GELW20
Hand lay-up white gelcoat intended to use with polyester and vinilester resins. Gelcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance.Gelcoat need..
108.90€ 169.40€
Ex Tax:90.00€
-20 %
Model: TOPW
Hand lay-up white topcoat intended to use with polyester and vinilester resins. Topcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance. I..
7.26€ 9.08€
Ex Tax:6.00€
-28 %
Model: TOPW20
Hand lay-up white topcoat intended to use with polyester and vinilester resins. Topcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance.&n..
127.05€ 175.45€
Ex Tax:105.00€
New
-16 %
Model: WINTER-EPOXY
Winter epoxy resin for low temperature conditions. Cure from +5°C.This is multipurpose winter epoxy resin is a low viscosity epoxy resin what is generaly used as laminating resin for wet layup and vacuum technology.The resin is destined to be used for processing and curing at room and encreased temp..
19.36€ 22.99€
Ex Tax:16.00€
-25 %
Model: GELB
Hand lay-up black gelcoat intended to use with polyester and vinilester resins. Gelcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance.Gelcoat need..
7.26€ 9.68€
Ex Tax:6.00€
-7 %
Model: TOPB
Hand lay-up black topcoat. Topcoat is a material used to provide a high-quality finish on the visible surface of a fibre reinforced composite material. It has an ISO base. Provides good hydrolisis resistance and UV resistance.Topcoat needs to be applied in 2 layers. It is best for the layers to ..
7.87€ 8.47€
Ex Tax:6.50€
-6 %
Model: 601-Z1-1.13
Multipurpose epoxy resin is a high viscosity epoxy resin what is generaly used as laminating resin for wet layup and vacuum technology.The resin is destined to be used for processing and curing at room and encreased temperature. It is suitable for<>
production of composite parts in combin..
18.76€ 20.03€
Ex Tax:15.50€
-9 %
Model: KEVS
Kevlar scissors specially made for cutting kevlar, spectra,ballistic nylon, carbon and other materials. No matter the material you cut, be it packing tape, fabric, cardboard, or a bolt of ballistic nylon, you will feel an uncanny sense os ease, and left to wonder how you managed life without them...
102.85€ 112.53€
Ex Tax:85.00€
-5 %
Model: 601-Z1-5.4
Multipurpose epoxy resin is a high viscosity epoxy resin what is generaly used as laminating resin for wet layup and vacuum technology.The resin is destined to be used for processing and curing at room and encreased temperature. It is suitable for<> production of composite parts in combination..
71.39€ 75.26€
Ex Tax:59.00€
-5 %
Out Of Stock
Model: INFUSION EPOXY
Infusion EPOXY is featuring encreased bounding strength and reactivity, outstanding
flexibility while a very high strength and temeprature resistance. The resin contains modificatory agent that
extremely improves penetration of the laminating mixture into the fabricHardener ID..
24.20€ 25.41€
Ex Tax:20.00€
-8 %
Model: ROW300
Price is for 1m2Low-priced glass fabric for standard applications in the design of models and sports equipment; good impregnation, satisfactory transparency; not approved for aviation.Fiberglass Woven Roving cloth is a collection of specific numbers of untwisted continuou..
2.66€ 2.90€
Ex Tax:2.20€
-14 %
Model: ROW600
Price is for 1m2Low-priced glass fabric for standard applications in the design of models and sports equipment; good impregnation, satisfactory transparency; not approved for aviation.Fiberglass Woven Roving cloth is a collection of specific numbers of untwisted continuou..
3.24€ 3.75€
Ex Tax:2.68€
-14 %
Model: Nitrila
High quality disposable nitrile gloves. Protects hands well from contact with resins or hardeners.One pack contains 100 pcs...
14.52€ 16.94€
Ex Tax:12.00€
-12 %
Model: Polyester-4.7
Unsaturated polyester resin tefephtalic pre-accelerated, low styrene emission and thixotropic unsaturated polyester resin. It contains a colour change system and will change from blue to natural brown colour when the catalyst is added to the resin.Polyester resin designed mainly for sp..
30.07€ 34.28€
Ex Tax:24.85€
-10 %
Model: BIAX 0/90
Biaxial fiberglass consists of two non-woven layers at 0/90 degree fiber angles. Polyester yarn and mat backing are used to knit the cloth. Using biaxal fiberglass cloth means less resin is necessary, the ability to lay fiber in the direction you want, and conforms easily. This is E-glass fiber..
4.48€ 4.96€
Ex Tax:3.70€
-25 %
Model: QIAX
Quadraxial fiberglass consists of three non-woven layers at + and - 45 and 0/90 degree fiber angles. Polyester yarn and mat backing are used to knit the cloth. Using quadraxial fiberglass cloth means less resin is necessary, the ability to lay fiber in the direction you want, and con..
4.83€ 6.47€
Ex Tax:3.99€
New
-11 %
Model: 340RHFKT400ml
Spabond™ 340 LV HT FAST is a high performance adhesive designed for bonding large structures such as yacht hulls and wind turbine blades. It is a cost-effective system with good thermal and mechanical properties. The formulation gives high thermal performance and allows fast curing, making this prod..
30.25€ 33.88€
Ex Tax:25.00€
-4 %
Model: BIAX600
Biaxial fiberglass consists of two non-woven layers at 45 degree fiber angles. Polyester yarn and mat backing are used to knit the cloth. Using biaxal fiberglass cloth means less resin is necessary, the ability to lay fiber in the direction you want, and conforms easily. This is E-glass fiberglas wi..
3.27€ 3.39€
Ex Tax:2.70€
-1 %
Model: POLIMAL 143 AWTP
Polyester resin Polimal 143AWTP is based on terepthalic acid it is unsaturated resin with low styrene emission, designed for wet layup and spraying method. This polyester resins low exothermal properties and fast curing makes it a fast and cost-effective resin for producing composite ..
883.30€ 891.77€
Ex Tax:730.00€
-2 %
Model: POLIMAL1094AWTP-2
Terethephtalic pre-accelerated, low styrene emission and thixotropic unsaturated polyester resin. It contains a colour change system and will change from blue to natural brown colour when the catalyst is added to the resin.Polyester resin designed mainly for spray application but is al..
895.40€ 913.55€
Ex Tax:740.00€
-3 %
Model: HYB165
The hybrid cloth twill is charactereized by its high impact resistance and mechanical properties which is provided by kevlars high tensile strenght, and as an added bonus the cloth is fortified by carbons high stiffness. This cloth is better used with epoxy or vinylester resins. Wi..
22.99€ 23.60€
Ex Tax:19.00€
New
-43 %
Model: 2400 TEX
Continuous Roving 2400 Tex, 17kgCoated with a silane based sizing compatable with Polyester and Polyurethane resin systems.This is a general purpose Roving used in spray lay up in Boat hulls, Sanitary ware ect...
33.88€ 59.29€
Ex Tax:28.00€Showing 1 to 32 of 32 (1 Pages)